Our Business Is Your Safety & Security
0345 877 8928

protekt ALARMS





Our superb wire-free systems are class leading and ensure the continued safety and security of you, your family and your home. These outstanding security systems are not available in local DIY stores and are the best available to us, and now you.



protekt UK are one of the first Alarm Installers in the country to be authorised to supply and fit the latest Risco Agility Wire-free alarm systems!
Ask us for details.



protekt UK can supply and install advanced wire-free domestic & residential security alarms at amazing rates.



Alarm Servicing and Monitoring


At protektUK, we're always trying to look for ways to offer our customers better service and value.


On 1st March 2009 we launched our alarm servicing and maintenance service. For a small annual fee, we'll conduct a full service of your alarm system every year. We'll remind you after 11 months and arrange a convenient time to visit the premises to give the system the 'once-over'.


We'll conduct a full survey of the alarm and supply you with a report/certificate of service, allowing you to prove its serviceability.

We can offer landlords or agents of multiple properties a discount, provided that the systems can be serviced on the same day and are in the same geographical area (20 mile radius)


*This system is capable of dialling pre-set phone numbers should a breach be detected, by connecting to your land line telephone system. It is also expandable, allowing the addition of;-


PET Sensitive PIRs,

Glass-break Detectors

Gas Detectors

Smoke Detectors

CO Detectors

GSM dialler (to notify your mobile phone)

Flood Detector .

Please note that each additional accessory will be fitted for a small additional cost (plus the price of the accessory) if ordered with a full system.


Security Alarm Information


EN50313 European Standards For Intruder Alarms Systems

The British Standards 4737, 7042, and BS 6799 Wireless Systems have now been replaced by the new European Standards BSEN 50131 series.


European Standards are not retrospective, therefore systems which are currently installed to British Standards will continue to be maintained and updated to that standard.


The European Standards have been under development for some time, and not all of the standards are complete, but work on these standards continues. However, there are a suite of European Standards available to enable companies to install to. To enables this, the European Standards will include a document PD6662:2004. This is a Published Document (PD) and is used to call up parts of the current standards of British Standards where European Standards are still under development. As new parts of the European Standards are completed they will eventually replace those parts of thePD6662, which will eventually be phased out.

Risk assessment


One of the most significant issues within the new EN standards will be evaluating the risk associated with the premises and determining a grade of system. This is because once the grade of a system is determined it will define the extent of the system, its signalling and tamper security.

Grades Explained
One of the most important aspects of the EN 50131 requirements is the concept of a security grade. For each installation the grade of system has to be chosen according to various factors. In the EN the grade is described in terms of the type of intruder and how much effort they put into the burglary.
Security Grades

Grade 1 is for an installation with a low risk of theft. The property is not likely to attract intruders. It is assumed that a thief is likely to be opportunistic rather that bothering to plan things in advance. In the application guide (DC CLC/TS 50131-7) it assumes that an intruder is simply going to break open a door.


Grade 2 is for a slightly higher risk of theft. The property is likely to havesomething of interest to an experienced thief. In this case theintruder is expected to have some knowledge of how alarm systems workand possibly carry some tools to allow him to overcome a simple alarmsystem. The thief is likely to check the building for ease of access through doors, windows and other openings.


Grade 3 is for a reasonably substantial risk property. There is good reason to assume it may be broken into and might well contain objects of high value. An intruder is likely to gain access by penetrating doors, windows or other openings. The thief could be very experienced with intruder alarm systems and possess a number of tools and equipment to overcome the system.


Grade 4 is for very high-risk properties. Intruders could be expected to plan a burglary in advance and have the knowledge and equipment to alter parts of the intruder alarm system to prevent detection. It is assumed that the intruder could gain access by penetration of floors, walls and ceilings. The intruder is unlikely to be working alone.


What Grade of System does my installation need?


This is difficult to say at the moment and opinion on this matter varies from country to country. The view in the UK tends to require grades that are higher than other countries (e.g. a shop in Belgium at grade 2 could be grade 3 in the UK). To a large degree the choice of grade would be guided by insurance companies. A typical view thought could be:


Grade 1 would only be of interest in domestic properties (without an insurance replacement for an alarm system)

Grade 2 would be most domestic properties
and low risk commercial (e.g. florists)

Grade 3 would be for high-risk domestic and most commercial properties (e.g. Newsagent/cigarette sales)

Grade 4 would be for extremely high-risk domestic and higher risk commercial properties (e.g. bank)


Mixing Components of Different Grades


The EN standard says that it is not necessary to use the same grade of component throughout an intruder system.


If the installation is a grade 2 then there is no problem using, for example, a grade 3 power supply.


If however an installer fits a grade 2 component (such as a detector) in a system then that system is limited to grade 2 at best.


It is possible to have a defined part of a system at a higher grade so long as all associated parts are at the same (or higher) grade. For example a system combining intruder and hold-up (PA) functionality could have a grade 4 hold-up system whilst the intruder parts were limited to a grade 3. But this example is only valid if the power supply, alarm transmission system and warning devices used by hold-up (PA) parts are all grade 4. This would still allow intruder parts such as PIR's to be grade 3. The system as a whole is, of course, only grade 3.


Please note that our alarm installation service is limited to residential systems only.

At this time, we do not undertake commercial alarm installations.